| |
Repsol Aries Turbogas CC 46
Description
A fluid elaborated with hydrocraking stocks, specially designed for lubrication of gas and vapor turbines of the latest generation. It is characterized fundamentally due to its exceptional resistance to oxidation, which multiplies its service life period. The oil includes EP properties which allow the lubrication of gearbox in turbines.
Recommended uses
It is especially appropriate for gas and steam turbines and turbo-compressors which run at high temperatures and required a high performance. It is recommended to use in ammonia compressors.
Qualities
Exceptional resistance to ageing and to the formation of sludge.
High anti-rust capacity.
Great capacity for separating itself from water.
Excellent anti-foaming qualities.
Good separation of air.
Optimum Extreme Pressure properties.
Quality Level
L-TG according to DIN-51515 Parte 2 HM according to ISO 6743/4
TGE according to ISO 6743/5 CKB according to ISO 6743/6
SIEMENS TLV 901304 VDL according to DIN 51506
ISO VG 32 grade exceeds GEK 101941a and GEK 107395a
Technical Characteristics
|
UNIDADES |
METODO |
VALOR |
VALOR |
Type |
|
|
32 |
46 |
Density at 15oC |
g /cm |
ASTM D 4052 |
0,838 |
0,843 |
ISO VG Grade |
3 |
|
32 |
46 |
Viscosity at 40oC |
cSt |
ASTM D 445 |
32,0 |
46,0 |
Viscosity Index |
|
ASTM D 2270 |
120 |
130 |
Pour Point |
oC |
ASTM D 97 |
- 15 |
-15 |
Flash Point |
oC |
ASTM D 92 |
230 |
250 |
F.Z.G. Stage, m¨ªn |
|
DIN 51354 |
8 |
8 |
RPVOT |
min |
ASTM D 2272 |
1300 |
1300 |
Neutralization no at 7000h. |
mgKOH/g |
ASTM D 943 |
<2 |
<2 |
Available in
Bulk and 185 kg drums.
Hazard Identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Certain minimum precautions to avoid prolonged contact with the skin should be taken when handling. The use of gloves, visors or masks is recommended in order to avoid splashes.
Health and safety hazards
Inhalation: Minimum risk of inhalation as it is a non-volatile product.
Ingestion: Does not cause vomiting. Drink water. Seek medical assistance.
Contact with Skin: Wash with abundant water and soap.
Eyes: Wash with abundant water.
General measures: Seek medical assistance.
Fire fighting measure
No special measures are required.
Fire control: Foams, dry chemicals, CO2, water spray. Do not apply water jet directly as this may cause the product to spread.
Environmental precautions
Danger of physical contamination in the case of spillage (water flows, coastal areas, the ground, etc.) due to its floating capacity and oily consistency which may cause damage to fauna and flora with which it comes into contact. Avoid its penetration into water containers or outlets.
Decontamination and cleaning: Treat as an accidental oil spillage. Avoid spreading by using mechanical barriers and eliminate using both physical and chemical means.
Unless otherwise specified, the values cited in technical characteristics should be considered as typical. |
|
